![]() Roadside hazards must be assessed for the danger they pose to traveling motorists based on size, shape, rigidity, and distance from the edge of travelway. While crash testing cannot replicate every potential manner of impact, testing programs are designed to determine the performance limits of traffic barriers and provide an adequate level of protection to road users. To make sure they are safe and effective, traffic barriers undergo extensive simulated and full scale crash testing before they are approved for general use. Where possible, it is preferable to remove, relocate or modify a hazard, rather than shield it with a barrier. They should only be installed where a collision with the barrier is likely to be less severe than a collision with the hazard behind it. While barriers are normally designed to minimize injury to vehicle occupants, injuries do occur in collisions with traffic barriers. Traffic barriers can also be used to protect vulnerable areas like school yards, pedestrian zones, and fuel tanks from errant vehicles. Some of these barriers, designed to be struck from either side, are called median barriers. They are also installed within medians of divided highways to prevent errant vehicles from entering the opposing carriageway of traffic and help to reduce head-on collisions. ![]() Traffic barriers (sometimes called Armco barriers, also known in North America as guardrails or guard rails and in Britain as crash barriers ) keep vehicles within their roadway and prevent them from colliding with dangerous obstacles such as boulders, sign supports, trees, bridge abutments, buildings, walls, and large storm drains, or from traversing steep (non-recoverable) slopes or entering deep water. ![]() Traffic barrier with a pedestrian guardrail behind it
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |